莊劍鳴1, 唐啟榮2， 楊雪峰2
(1. 中南大學 資源加工與生物工程學院，長沙 410083；
2. 昆明鋼鐵集團有限責任公司， 昆明 650302)
摘 要: 以大紅山、 曼南坎和滇灘等精礦的粒度以及膨潤土用量和潤磨時間為因子， 以生球落下強度、 生球爆裂溫度、 預熱球抗壓強度和焙燒球抗壓強度為評價指標， 進行了五因子二次回歸組合實驗研究。 結果表明： 隨著鐵精礦小于0.074 mm粒級含量的增加， 生球爆裂溫度下降， 預熱球和焙燒球抗壓強度提高； 當鐵精礦小于0.074 mm粒級含量小于75%(質量分?jǐn)?shù))時， 生球落下強度逐漸上升， 當小于0.074 mm粒級含量為75%時， 生球落下強度達到最大值， 之后有下降趨勢。 并不是鐵精礦粒度越細球團強度就會越好， 鐵精礦粒度還應該滿足一個合適的粒度組成。
關鍵字: 鐵精礦； 粒度； 球團強度
LI Guang-hui1, ZHUANG Jian-ming1, TANG Qi-rong2, YANG Xue
（1. School of Resources Processing and Bioengineering,
Central South University, Changsha 410083, China;
2. Kunming Iron and Steel (Group) Co. Ltd., Kunming 650302, China）
Abstract: Orthogonal experiments were done by using different size distribution of Dahongshan concentrate, Mannankan concentrate, Diantan concentrate, bentonite dosage and time of damp milling and so on as factors, and the drop strength of green pellet, shock temperature of green pellet, compression strength of preheat pellet, compression strength of backing pellet as evaluating index.The results show that as the content of less than 0.074 mm grade iron concentrate increases, the shock temperature of green compression decreases; the strength of preheated pellet and the compression strength of backing pellet are improved; the drop strength of green pellet of iron concentrate increases when the content of less than 0.074 mm grade iron concentrate is lower than 75%; when the content of less than 0.074 mm grade iron concentrate is 75%, the drop strength of green pellet of mixed material is maximum. It can be concluded that the palletizing quality does not become better throughout as iron concentrate size decreases, actually iron concentrate should have a good size distribution.
Key words: iron concentrate; particle size; palletizing quality
