(1. 東北大學 材料與冶金學院， 沈陽 110004；
2. 大連交通大學 材料科學與工程學院， 大連 116028)
摘 要: 介紹一種制備超細晶材料的新技術——連續等徑角擠壓， 它將連續擠壓技術應用于制備超細晶材料的等徑角擠壓工藝， 解決了傳統等徑角擠壓不能制備大尺寸超細晶材料的問題， 該技術對超細晶材料的推廣應用具有重要意義。 通過DEFORM3D對銅的連續等徑角擠壓過程的數值模擬， 得到變形過程中金屬的流動、 應變場和溫度場情況， 并對不同變形速度和摩擦條件下的變形過程進行比較， 得到優化的工藝參數， 并以此參數進行實驗。 實驗結果表明， 連續等徑角擠壓后銅的硬度明顯上升， 連續等徑角擠壓3道次后， 硬度趨于飽和； 連續等徑角擠壓12道次后， 銅的平均晶粒尺寸為400 nm。
關鍵字: 銅； 連續等徑角擠壓； 超細晶； 有限元模擬
（1. School of Materials and Metallurgy, Northeastern University,
Shenyang 110004, China;
2. School of Materials Science and Engineering, Dalian Jiaotong University,
Dalian 116028, China）
Abstract: The continuous equal channel angular pressing introduced is a new method to produce ultra-fine grain(UFG) materials, which applies continuous extrusion technology in ECAP technology to manufacture UFG materials and solves the problem that can't manufacture large bulk UFG materials by traditional ECAP. Through simulating continuous ECAP process of copper by DEFORM-3D, the metal flow, strain field and temperature field are obtained. The deformation processes are compared under the conditions of various speeds and different friction factors, the optimum process parameters are obtained. The experiments are performed by optimum process parameters, the results indicate that the hardness increases clearly during the first 2 passes of continuous ECAP, and the hardness is saturated after 2 passes, the grain size of about 400 nm is achieved after 12 passes.
Key words: copper; continuous equal channel angular press; ultra-fine grain; finite element simulation
