(中南大學 粉末冶金國家重點實驗室，長沙 410083)
摘 要: 采用熱重法(TG)和差示掃描量熱法(DSC)研究了新型炭材料用糠酮樹脂的固化過程，分析固化劑含量及升溫速率對固化反應的影響，確定磷酸/糠酮樹脂固化體系的固化工藝，計算固化反應表觀活化能和反應級數，得到了糠酮樹脂固化反應動力學方程。并利用熱重－質譜聯用技術(TG-MS)研究樹脂在固化過程中的氣態產物。結果表明：糠酮樹脂的固化反應是一個復雜的反應過程，升溫速率和固化劑含量對固化反應都會產生重要的影響。對于本固化體系，固化劑含量以7%(質量分?jǐn)?shù))為最佳，該固化體系固化反應起始溫度和最佳固化溫度分別為102.32和159.07 ℃，反應活化能為73.33 kJ/mol，反應級數為0.9；糠酮樹脂的固化反應氣態產物以H2O為主，另有少量的CO、CH4和CO2。
關鍵字: 新型炭材料；糠酮樹脂；固化反應動力學；氣態產物
（State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China）
Abstract:The curing process of furfural acetone resin used for new carbon materials was studied by thermogravimetry-differential scanning calorimetry technology (TG-DSC) and thermogravimetry-mass spectrometric coupling technique (TG-MS). The effects of curing agent content and heating rate on curing reaction were analyzed; the curing mechanism of furfural acetone resin and gaseous products evolved during curing process were investigated. The results show that the curing agent content and heating rate both have great influence on curing reaction. In this experiment, the optimal curing agent content is 7% (mass fraction) of phosphorus acid, and for this system the initial curing temperature and the optimal curing temperature are 102.32 and 159.07 ℃, respectively; the apparent activation energy is 73.33 kJ/mol and the order of curing reaction is 0.9; the main gaseous products during the curing reaction are H2O and small amount of CO, CH4 and CO2.
Key words: new carbon materials; furfural acetone resin; curing kinetics; gaseous products
