(中南大學 信息科學與工程學院，長沙 410083)
摘 要: 針對鉛鋅燒結過程中復雜的過程優化控制問題，提出基于綜合工況評判模型的鉛鋅燒結過程操作參數優化方法。在基于機理分析的基礎上，綜合運用主元分析、神經網絡和模糊理論等方法，建立綜合工況評判模型；并根據當前的操作參數和綜合工況評判模型結果，采用基于模糊C均值聚類的匹配優化算法獲得最優的操作參數，從而為現場操作人員提供科學的操作指導。結果表明：該方法可顯著改善工況波動、提高燒結塊的產量和質量，較好地解決鉛鋅燒結過程的優化控制問題。
關鍵字: 鉛鋅燒結過程；操作參數；透氣性預測模型；產量質量預測模型；工況評判模型；模糊C均值聚類；匹配優化算法
（School of Information Science and Engineering, Central South University,Changsha 410083, China）
Abstract:An optimization method of operation parameter based on comprehensive status evaluation model was proposed on the background of optimization control problem for lead-zinc sintering process. Based on the sintering process mechanism analysis, the comprehensive status evaluation model was proposed, which synthesizes a lot of intelligent technique, including principle components analysis, neural network, fuzzy theory and so on. Then according to the current operating parameters and the result of comprehensive status evaluation model, the optimum operation parameters were calculated by using matching optimization algorithm based on fuzzy C-means clustering. The results show that the fluctuation of status can be meliorated efficiently and the output and quality of agglomerate is improved, so the problem of optimization control for lead-zinc sintering process can be resolved.
Key words: lead-zinc sintering process; operating parameters; permeability prediction model; output-quality prediction model; status evaluation model; fuzzy C-means clustering; matching optimization algorithm
