(哈爾濱師范大學 物理系，哈爾濱 150025)
摘 要: 為了研究大塊非晶合金中成分分離區的存在狀態及其在晶化過程中的作用，應用小角X射線散射技術(SAXS)和差示掃描量熱儀(DSC)研究Cu55Zr30Ti15非晶合金從310 K到783 K之間微結構的演化情況。實驗發現在淬火狀態下Cu55Zr30Ti15非晶合金中存在直徑為55 nm左右的成分分離區。非晶的結構弛豫包括659 K之前的低溫結構弛豫和659 K到玻璃轉變溫度的高溫結構弛豫。在玻璃轉變溫度到783 K之間，觀察到非晶基體中產生過渡相并轉化為最終晶相的過程。表明成分分離區在晶化過程中有著重要作用，其馳豫所產生的有序原子團簇是隨后晶化過程中晶核產生的基礎。
關鍵字: Cu55Zr30Ti15非晶合金；小角X射線散射；成分分離區；結構弛豫
amorphous alloy and its effect
ZHANG Di, NING Qian-yan, CHENG Wei-dong
（Department of Physics, Harbin Normal University, Harbin 150025, China）
Abstract: In order to study the composition segregation regions in bulk metallic glass, small angle X-ray scattering (SAXS) technique and differential scanning calorimetry (DSC) were used to investigate the evolution of microstructure in Cu55Zr30Ti15 amorphous alloy heated from 310 K to 783 K. It is confirmed that the composition segregation regions in the diameter of about 55 nm exist in the as-quenched state. The structural relaxation can be divided into the low temperature structure relaxation in the temperature range from 310 K to 659 K and the high temperature structure relaxation in the temperature range from 659 K to the temperature of glass transition. A transition phase was observed from the supercooled liquid region to 783 K. The results show that the domains with ordered clusters are the base of crystallization.
Key words: Cu55Zr30Ti15 amorphous alloy; small angle X-ray scattering; composition segregation region; structure relaxation
