(哈爾濱工業大學 材料科學與工程學院，哈爾濱 150001)
摘 要: 利用此方法對葉輪鍛件成形過程中兩個典型截面上4條流線及其軸向應變進行了測量分析，并定量給出該復雜鍛件成形過程中變形及應變分布規律。因而該方法是測試模鍛成形過程中金屬塑性變形流動較為有效的實驗手段。
關鍵字: 模鍛；塑性變形；應變分布
（School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China）
Abstract:A new method named lantern rings screw thread method, was put forward in order to solve the difficulties in measuring the strain and streamlines distribution during die forging of complex components. This method can not only measure but also analyze quantitatively the deformation of die forging without substituted material. The strain distribution can be obtained, when using the method to analyze the axial strain and the four streamlines of two typical sections during the deformation of a compressor impeller. So it can be used as a reliable experimental method to examine the strain distribution during die forging.
Key words: die forge; plastic deformation; strain distribution
