冷軋純鋁板再結晶模擬
(1. 山東大學 材料科學與工程學院，濟南 250061；
2. 東北大學 軋制技術及連軋自動化國家重點實驗室，沈陽 110004)
摘 要: 利用有限元軟件ANSYS模擬的冷軋鋁板應力場及其相應的儲能場，在假設的介觀非均勻儲能場基礎上，考慮冷軋鋁板的宏觀能量場的非均勻性，實現了金屬變形的有限元方法與Monte Carlo 再結晶模擬方法的耦合，有效地模擬非均勻儲能場基礎上的冷軋鋁板再結晶過程，結合現有的理論與實驗結果，比較和驗證了兩個極限儲能部位的介觀結構拓?fù)浣M織和再結晶動力學參數，得到較為理想的結果。
關鍵字: 鋁板；Monte Carlo；有限元；再結晶；儲能分布
recrystallization in cold rolling
pure aluminum sheet
（1. School of Material Science and Engineering, Shandong University,Ji’nan 250061, China;
2. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China）
Abstract:The finite element method (FEM) and Monte Carlo method (MC) were coupled to simulate the microstructure evolution of inhomogeneously deformed aluminum sheet after annealing. Finite element method was used to calculate the stored energy distribution of the cold rolling aluminum sheet. On the assumption of the mesoscale non-uniform energy distribution, taking macro-scale non-uniform energy distribution into account, the stored energy distribution obtained from FEM was then used in Monte Carlo method to simulate the microstructure evolution. The modeling results are compared with the theoretical and experimental results and an acceptable agreement is achieved.
Key words: aluminum sheet; Monte Carlo; FEM; recrystallization; stored energy distribution
