中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 22 No. 2 December 2012 |
（1. National Key Laboratory for Precision Hot Processing of Metals, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;
2. State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering,
Harbin Institute of Technology, Harbin 150001, China）
Abstract:The magnetic pulse joining (MPJ) between 3A21 aluminum alloy and steel 20 tubes was experimentally investigated with a solenoid coil assisted by a field shaper. The mechanical properties and microstructure of MPJ joints were tested and observed. The results show that the metallurgical joints can be obtained at a voltage of 15 kV, a radial gap of 1.2-1.4 mm, and a slope angle of 3°-7° in the lapping area. The joint comprises a transition zone with different widths, two matrix metals and two interfaces between the zone and the two metals. The interface presents a typical wavy pattern and mutual diffusion of Fe and Al elements happens in the zone. The transition zone is composed of Fe-Al intermetallics, micro cracks and micro pores. The microhardness of the transition zone is much higher than that of the matrix metals.
Key words: magnetic pulse joining; dissimilar metals; metallurgical joint; field shaper; aluminum; steel
