中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 22 No. 4 April 2012 |
directionally solidified TiAl−Nb alloys
（1. National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China;
2. State Key Laboratory for Advanced Metals and Materials,
University of Science and Technology Beijing, Beijing 100083, China）
Abstract:The double directional solidification (DS) technique was developed to control the lamellar microstructures in primary β TiAl−Nb alloys. Polysynthetically twinned (PST) crystals with lamellar boundaries parallel to or inclined 45º to the growth direction were achieved due to the complete peritectic transformation during directional solidification of the alloys with the dendritic solid/liquid interface. The PST crystals with aligned lamellar boundaries only parallel to the growth direction were produced when lamellar grains with lamellar boundaries in the same orientation were seeded by themselves under appropriate growth conditions. Low boron addition is harmful to align the lamellar orientation because of the growth of non-peritectic α phase. Due to the larger yttria particles and boride ribbons in the directionally solidified TiAl−Nb alloys, the tensile plastic elongations of the alloys are only close to 2%.
Key words: titanium aluminides; directional solidification; peritectic transformation; lamellar orientation; polysynthetically twinned crystals; mechanical properties
