中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 Special 2 August 2011 |
ultrasonic brazing of AlMMCs
（1. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China;
2. School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China）
Abstract:Composite materials (55% (volume fraction) SiCp/A356) were brazed with the assisted ultrasonic wave by filling with a Zn-based alloy solder. With different bonding temperatures, two kinds of bonds, which contained 7% and 35% SiC particles, respectively, were fabricated. The results show that the two kinds of bonds have not only different microstructure properties, but also different crack propagation behaviors, which will bring on wide difference in mechanical properties. The shear strength of the bond containing 35% SiC particles is above 244 MPa, which is 84.7% higher than that of the bond containing 7% SiC particles. The reason is that the SiC particles in the composite bonds can effectively suppress the fracture. And the fracture is also effectively delayed by the Al-based solid solution in the composite bonds. Therefore, with appropriate bonding parameters, ultrasonic brazing can make the SiC particles and Al contents increase in the bond, and this distribution will contribute to the enhanced strength of the brazed bonds.
Key words: aluminum metal matrix composites; brazing with assisted ultrasonic wave; fracture behavior
