中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 8 August 2011 |
sintered metal fibrous media with high specific surface area
（Key Laboratory of Advanced Manufacturing Technology of Surface Functional Structure of
Guangdong Higher Education Institutes, South China University of Technology, Guangzhou 510640, China）
Abstract:A procedure of low temperature solid-phase sintering (LTSS) was carried out to fabricate sintered metal fibrous media (SMFM) with high specific surface area. Stainless steel fibers which were produced by cutting process were first plated with a coarse copper coating layer by electroless plating process. A low-temperature sintering process was then completed at about 800 °C for 1 h under the protection of hydrogen atmosphere. The results show that a novel SMFM with complex surface morphology and high specific surface area (>0.2 m2/g) can be obtained in this way. The effect of sintering temperature on the surface morphology and specific surface area of SMFM was studied by means of scanning electron microscopy and Brunauer-Emmett-Teller. The damage of micro-structure during the sintering process mainly contributed to the loss of specific surface area of SMFM and the optimal sintering temperature was 800 °C.
Key words: sintered metal fibrous media; low temperature solid-phase sintering; electroless copper plating; surface morphology; specific surface area
