Abstract:The effect of interface reaction on the fractal dimensions of fracture surface in aluminum borate whisker-reinforced aluminum alloy 6061 composite was investigated. The composite was fabricated by squeeze-casting technique. The fracture surfaces created in tensile test were measured by vertical sectioning method. Fractal phenomena were found in two plots, in which the measuring units were from 3 to 15 μm and 1 to 5 μm, respectively. The relation was established between the tensile properties and fractal dimension with measuring units of 3−15 μm. The results show that the ultimate tensile strength increases while the fracture surface roughness increases with fractal dimension increasing due to the change in fracture mode depending on the degree of interface reaction status induced by heat treatment. But when the measuring units are 1−5 μm, fractal dimension does not change with heat treatment.

Key words: aluminum matrix composite; aluminum borate whisker; fractal; fracture