中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 1 January 2011 |
different microstructures at elevated temperatures
（1. School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;
2. State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;
3. Department of Modern Mechanics, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, China）
Abstract:Experimental studies were conducted on the tensile behaviors and fracture modes of TiAl (Ti-46.5Al-2Nb-2Cr) alloys with near gamma (NG) equiaxed and near lamellar (NL) microstructures over a temperature range from room temperature to 840 °C and a strain rate range of 0.001−1 350 s−1. The results indicate that the alloys are both temperature and strain rate dependent and they have a similar dependence. The dynamic strength is higher than the quasi-static strength but almost insensitive to high strain rate range of 320−1 350 s−1. The brittle-to-ductile transition temperature (BDTT) increases with increasing strain rates. NG TiAl yields obviously, while NL TiAl does not. Below BDTT, as the temperature increases, the fracture modes of the two alloys change from planar cleavage fracture to a mixture of transgranular and intergranular fractures, and finally to totally intergranular fracture.
Key words: TiAl intermetallics; high strain rate; elevated temperature character; tensile properties; fracture mode
