中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 17 Special 1 November 2007 |
ZHOU Yang(周 陽)1, DING Wen-jiang(丁文江)1
（1. National Engineering Research Center for Light Alloy Net Forming, Shanghai Jiao Tong University,
Shanghai 200030, China;
2. School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China）
Abstract:Mg-10Gd-3Y-0.5Zr alloy was cast in a step-like mould with five different cooling rates. The as-cast microstructures of the different steps were examined with optical microscope(OM) and scanning electron microscope(SEM). The room temperature mechanical properties were examined by tensile test. The results show that the microstructures are refined and the second phase particles are distributed much uniformly with the increase of cooling rate. The increase of yield strength, ultimate strength and elongation can be ascribed mainly to the strengthening effect of fine grains. The relationship between grain size and yield strength/hardness agrees with the Hall-Petch behavior.
Key words: Mg-Gd-Y alloy; solidification condition; microstructure; mechanical properties
