中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 20 No. 5 May 2010 |
mechanical properties of Mg-5Zn-5Sn alloy
（1. Materials Science and Engineering College, Chongqing University of Technology, Chongqing 400050, China;
2. National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400030, China）
Abstract:The effects of Ca addition on the as-cast microstructure and mechanical properties of the Mg-5Zn-5Sn (mass fraction, %) alloy were investigated. The results indicate that an addition of 0.5%−1.5% (mass fraction) Ca to the Mg-5Zn-5Sn alloy not only refines the as-cast microstructure of the alloy but also causes the formation of the primary and/or eutectic CaMgSn phases with high thermal stability; an increase in Ca amount from 0.5% to 1.5% (mass fraction) increases the amount and size of the CaMgSn phase. In addition, Ca addition to the Mg-5Zn-5Sn alloy improves not only the tensile properties at room temperature and 150 ℃ but also the creep properties. Among the Ca-containing Mg-5Zn-5Sn alloys, the one added 0.5% (mass fraction) Ca obtains the optimum ultimate tensile strength and elongation at room temperature and 150 ℃, however, the alloy added 1.5% (mass fraction) Ca exhibits the optimum yield strength and creep properties.
Key words: magnesium alloy; Mg-5Zn-5Sn alloy; microstructure and properties; Ca addition
