中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 19 Special 3 December 2009 |
CHEN Yu-yong(陳玉勇)1, HUANG Yu-dong(黃玉東)2
（1. College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China;
2. School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China）
Abstract:Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of thermally sprayed deposits with the porosity below 2%. Both crystallization and oxidation occurred obviously during spraying process, so that the amorphous fraction of the coatings decreased to 54% compared with fully amorphous alloy ribbons of the same component. Corrosion behavior of the amorphous coatings was investigated by electrochemical measurement. The results show that the coatings exhibit extremely wide passive region and low passive current density in 3.5% NaCl (mass fraction) and 1 mol/L HCl solutions, which illustrates excellent ability to resist localized corrosion.
Key words: Fe-based amorphous coating; detonation gun; microstructure; corrosion behavior
