中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 13 No. 1 February 2003 |
reforming waste plastics cracking product
CHEN Xiao-qing(陳曉青)2, CHEN Zhi-yong(陳志勇)2,
YAN Gang(鄢 鋼)1
（1.Department of Environmental Science and Engineering,
Hunan University, Changsha 410082, China;
2.Institute of Chemistry and Chemical Engineering,
Central South University, Changsha 410083, China）
Abstract:The rare earth Zr catalyst, whose carrier was Al2O3, was prepared by coprecipitation with Zr(NO3)2, Al(NO3)3, and(NH2)2CO as the raw materials. The obtained catalyst was used to reform the waste plastic cracking product. As the Zr content in the catalyst increases, the yields of gasoline, gas, and the rate of carbon deposition increase, but the yields of diesel and heavy oil decrease. The optimum Zr content of the catalyst is 5%. At 290℃, with this most suitable catalyst, the yield of liquid fuel oil is the highest, about 86.10%, and research octance number(RON) of the gasoline is 92.15.
Key words: rare earth Zr catalyst; co-precipitation; waste plastic cracking
