中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 12 No. 4 August 2002 |
in-situ formed intermetallic Al3Ti
（1. Department of Materials Science and Engineering,
Xi′an Ins titute of Technology, Xi′an 710032, China;
2. School of Materials Science and Engineering,
Xi′an Jiaotong University, Xi′ an 710049, China）
Abstract:The reinforced phase of in-situ formed intermetallic compound Al3Ti with grain size about 0.5μm in the aluminum matrix composite was achieved by the method of liquid-solid reaction under specific condition. The orientations were al so studied. The results show that under T6 heat treatment regime, the tensile strength, hardness, elastic modulus and elongation of Al3Ti/ZL101 in-situ composite are increased by 32.8%, 14.4%, 19.2% and 14.6% respectively in comparison with those of ZL101. Al3Ti is uniformly distributed in α(Al) matrix with a clear phase interface, and the orientation relationship between Al3Ti and α(Al) is (006)Al3Ti∥(0-22)Al，［1-22］Al3Ti［11-0］Al. The strengthening mechanisms of Al3Ti/ZL101 in-situ compo site is proved to be caused by fine grain size, spreading distribution and dislocation multiplication.
Key words: in-situ composite; microstructure; mechanical properties; reinforcement mechanism
