中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 17 No. 1 January 2007 |
of ultra-fine Al2O3-(ZrO2+3%Y2O3) bioceramics by using
high-frequency induction heat sintering
（Division of Advanced Materials Engineering, RIAMD, Chonbuk National University, Jeonju 561-756, South Korea）
Abstract:Alumina/zirconia composites were synthesized by wet-milling technique and rapid consolidation with high frequency induction heat sintering(HFIHS). The starting materials were a mixture of alumina micro-powder (80%, volume fraction) and 3YSZ nano-powders (20%). The mixtures were optimized for good sintering behaviors and mechanical properties. Nano-crystalline grains are obtained after 24 h milling. The nano-structured powder compacts are then processed to full density at different temperatures by HFIHS. Effects of temperature on the mechanical and microstructure properties were studied. Al2O3-3YSZ composites with higher mechanical properties and small grain size are successfully developed at relatively low temperatures through this technique.
Key words: bioceramic; alumina; zirconia, mechanical wet-milling, sintering
