中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 34 No. 8 August 2024 |
（1. School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China;
2. Department of Mechanical Engineering, CEMMPRE-Centre for Mechanical Engineering Materials and Processes, University of Coimbra, Coimbra, Portugal）
Abstract:In order to increase the processability and process window of the selective laser melting (SLM)-fabricated Al-Mn-Mg-Er-Zr alloy, a novel Si-modified Al-Mn-Mg-Er-Zr alloy was designed. The effect of Si alloying on the surface quality, processability, microstructure, and mechanical properties of the SLM-fabricated alloy was studied. The results showed that introducing Si into the Al-Mn-Mg-Er-Zr alloy prevented balling and keyhole formation, refined the grain size, and reduced the solidification temperature, which eliminated cracks and increased the processability and process window of the alloy. The maximum relative density of the SLM-fabricated Si/Al-Mn-Mg-Er-Zr alloy reached 99.6%. The yield strength and ultimate tensile strength of the alloy were (371±7) MPa and (518±6) MPa, respectively. These values were higher than those of the SLM-fabricated Al-Mn-Mg-Er-Zr and other Sc-free Al-Mg-based alloys.
Key words: selective laser melting; Al-Mn-Mg-Er-Zr-Si alloy; surface roughness; processability; mechanical properties
